Maintaining The Transmitter; Changing The Battery - Honeywell XYR 5000 Series User Manual

Wireless dual discrete input transmitter, 900 mhz ism band
Hide thumbs Also See for XYR 5000 Series:
Table of Contents

Advertisement

Honeywell Industrial Wireless
8.

Maintaining the Transmitter

Warning! Explosions may result in death or serious injury. Do
not remove the instrument cover or open wiring housing in
explosive atmospheres when power and communications are
on. Instead, remove the Transmitter from the hazardous
location and then proceed to open the instrument cover and
replace the battery
Warning! When removing the housing do not twist or bend the
green flex cable! Doing so may cause the tether to improperly
seat next to the antenna and greatly reduce operable RF
distances. Do not allow the housing to flop around while
hanging by the tether.
Rev 5
08/06
.
The Switch Input Transmitter is extremely easy to maintain in that it
requires no periodic calibration or system checks. The Transmitter
has a self-diagnostic that is constantly checking the internal system.
If any errors are found, they are reported via the LCD, Base Radio,
or WMT. A simple yearly visual inspection for the following is all that
is needed:
Is the Transmitter still securely fastened to the equipment being
monitored?
Are there any visible corrosions, cracks or residue build-ups on
the unit?
Has anything about the application changed from the original
intended use?
8.1.

Changing the Battery

The battery will need to be changed within one month of seeing a
'LOW BAT' message on the Transmitter. This is a simple process:
[1]
Make sure you have the correct replacement battery:
TADIRAN™ Lithium Inorganic Battery (non-rechargeable)
Size "C" – 3.6Volts
#TL2200/S
[2]
Power down the Transmitter by pressing and holding both the
NEXT and ENTER buttons for a few seconds and then
entering the password
[3]
Remove the 4 set screws on the sides of the Transmitter
housing with a standard screwdriver.
[4]
Remove the housing and locate the battery.
[5]
Remove the old battery and replace it with the new battery,
positive end first.
User Manual
Wireless Dual Discrete Input Transmitter
.
- 40 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ww591Ww592

Table of Contents