Perkins 2206-E13 Operation And Maintenance Manual page 44

44
Maintenance Section
Refill Capacities
Table 14
Property UNITS
Aromatics %Volume
Ash %Weight
Carbon Residue on %Weight
10% Bottoms
-
Cetane Number
(2)
Cloud Point °C
-
Copper Strip
Corrosion
Density at 15 °C Kg / M
(59 °F)
(3)
Distillation °C
Flash Point °C
-
Thermal Stability
Pour Point °C
Sulfur %mass
(1)(4)
Kinematic Viscosity "MM"
(5)
Water and sediment % weight
Water % weight
Sediment % weight
Perkins Specification for Distillate Diesel Fuel
Requirements
35% maximum
0.01% maximum
0.35% maximum
40 minimum
The cloud point must
not exceed the lowest
expected ambient
temperature.
No. 3 maximum
801 minimum and 876
3
maximum
10% at 282 °C
(539.6 °F) maximum
90% at 360 °C (680 °F)
maximum
legal limit
Minimum of 80%
reflectance after aging
for 180 minutes at
150 °C (302 °F)
6 °C (42.8 °F) minimum
below ambient
temperature
1% maximum
"/S (cSt)" The viscosity of the
2
fuel that is delivered to
the fuel injection pump.
"1.4 minimum/4.5
maximum"
0.1% maximum
0.1% maximum
0.05% maximum
(1)
"ASTM"Test "ISO"Test
D1319 "ISO"3837
D482 "ISO"6245
D524 "ISO"4262
D613/D6890 "ISO"5165
D2500
"ISO"3015
D130 "ISO"2160
No equivalent test "ISO 3675 ""ISO 12185"
D86 "ISO"3405
D93 "ISO"2719
D6468 No equivalent test
D97 "ISO"3016
D5453/D26222 "ISO 20846 ""ISO 20884"
D445 "ISO"3405
D1796 "ISO"3734
D1744 No equivalent test
D473 "ISO"3735
SEBU8337
(continued)