Fig 6.2 Data Flow about Ethernet-to-Serial
STEP1.
① Make sure the position of the mode switch is normal mode.
② Connect the computer and EG-SR-7100A Test Board by using RS-232.
③ Connect the computer and EG-SR-7100A Test Board by Ethernet cross-over cable.
④ Power on the EG-SR-7100A Test Board.
STEP2.
(EG-SR-7100A Environment Setup)
① Configure the EG-SR-7100A using configuration tool as shown in Fig.6.3.
Fig 6.3 Result Window after Running "Setting"
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
20