Table of Contents
Advertisement
Mixed mode
In this mode, EG-SR-7100A operates as TCP Server and waits for the
connction request from the peer. If there is no connection and have data to
be sent to the Ethernet, EG-SR-7100A changes to the client mode and send
this data to the server IP.
UDP mode
In UDP mode, any special connection procedure is not defined.
(K) Direct IP Search
If the Direct IP search is checked, the configuration tool use the TCP instead
UDP broadcast. Therefore, IP address of a module is required.
This feature is useful when the module is not in the same subnet.
(L) Search
The Search function is used to search all modules existing on the same LAN.
By using UDP broadcast, all modules on the same subnet will be searched.
The located module is displayed as MAC address in the "Board list".
(M) Setting
Select the MAC address from the "Board list", the default configuration value
of the module will be displayed. Change the configuration and click "Setting"
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
Fig 2.6 UDP mode
10
Advertisement
Table of Contents
