00
00
00
Downloading procedure of configuration file
a. Connect between EG-SR-7100A and Test PC with serial cable
b. Run terminal emulator program (e.g. Hyper terminal) on Test PC
c. Turn EG-SR-7100A's power on and press 'p' on terminal emulator program in a few
seconds immediately. (To send the configuration file using pin JP1.12 or typing 'p'
when the module is power up.)
d.
"Transfer
Config
configuration file by ASCII (text) mode.
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
UDP mode (00: TCP; 01: UDP)
Reserved for future use
Reserved for future use
File!"
message
will
be
shown.
Then,
transfer
prepared
16