Fig 2.3 Configuration Tool Initialization Window(Option Config.)
(A) Version
Represent Firmware version
(B) Enable Serial Debug Mode
If this mode is checked, you can monitor the status and socket message of
EG-SR-7100A(listen OK, connect fail etc.) through terminal. If not, it's not
need to check.
(C) Board List
Display all EG-SR-7100A in the subnet as MAC address when click "Search"
button.
(D) Local IP/Port
EG-SR-7100A's IP address and Port number for connection
(E) Subnet
EG-SR-7100A's Subnet mask
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
7