Table of Contents
Advertisement
1.
拔下风扇电源转接头。
2.
松开风扇支架上的 4 颗螺丝 , 小心将风扇支架取出 ( 如图 3.4)。
3.
卸下故障风扇上的 4 个螺丝，并取出风扇。
4.
把新风扇固定在风扇支架上。
5.
插上风扇电源转接头。
1.
拔下風扇電源轉接頭。
2.
鬆開風扇支架上的 4 顆螺絲 , 小心將風扇支架取出 ( 如圖 3.4)。
3.
卸下故障風扇上的 4 個螺絲，並取出風扇。
4.
把新風扇固定在風扇支架上。
5.
插上風扇電源轉接頭。
Figure 3.3: Replacing system fan/ 更换系统风扇 / 更换系統風扇
Replacing the Power Supply/ 更换电源 / 更換電源
3.4
HPC-7120 supports a FATX and 1U power supply. To replace the power supply, pro-
ceed as follows:
1.
Unplug the power cord from the power supply.
2.
Remove the top cover.
3.
Unplug the 20-pin (or 24-pin) ATX power connector and 4-pin/8-pin +12 V power
connector from the motherboard, as well as the power connectors from the disk
drives and peripherals.
4.
Loosen the screws on the rear plate and the two screws on the power supply
bracket and then gently take it out. (see Figure 3.9)
5.
Replace the power supply with a new one and fasten it onto the chassis.
HPC-7120 User Manual/ 用户手册
19
Advertisement
Table of Contents
