Vejledning til ElmaFlex 430 Sand RMS fleksibel AC strømtang. Med ElmaFlex 430 er det super nemt at måle strøm i et stort område. Tangen er lavet af et meget fleksibelt materiale som med en diameter på kun 7,5mm og en længde på 457mm (ø145mm) gør det muligt at komme til selv de mest utilgængelige steder.
ElmaFlex 430 6 Anvendelse 6.1 AC strøm målinger Tryk på Tænd/sluk tasten for at tænde instrumentet. Indsæt instrumentets udgangsledninger til et høj præcision universal digital multimeter, der er indstillet i området AC spænding. Estimer den forventede strøm og indstil A området på instrumentet og AC spændings området på...
Manual för ElmaFlex 430 True RMS flexibel AC ström tångamperemeter. Med ElmaFlex 430 är det superenkelt att mäta ström i ett stort område. Tången är gjord av ett mycket flexibelt material som med en diameter på bara 7,5mm och en längdepå 457mm (ø145mm) gör det möjligt att komma åt även på...
ElmaFlex 430 6 Användning 6.1 AC strömmätning Tryck på På-/av-knappen för att slå på instrumentet. Anslut instrumentets utgångsledningar till en högprecisions universal digital multimeter, som är inställd på området AC spänning. Estimera den förväntade strömmen och ställ in A-området på instrumentet och AC spänningsområdet på...
Guide ElmaFlex 430 True RMS flexible AC current clamp. With the ElmaFlex 430 it is super easy to measure current in a large area. The coil is made of a very flexible material, with a diameter of only 7.5mm and a length of 457mm (ø145mm), making it possible to reach even the most inaccessible places.
ElmaFlex 430 Description 3.1 Meter Description 1. Flexible current coil 2. Range switch 30A-300A-3000A 3. Power switch 4. Analog voltage output cable 5. Power indication LED on (green)/low battery (red) 6. Turn knob for current coil 4 Specifications Measurement Output...
ElmaFlex 430 6 Operation 6.1 AC Current Measurements Press the On / Off button to turn on the instrument. Insert the instrument output leads to a high precision universal digital multimeter set in the AC voltage range. Estimate the expected current and set the A area of the instrument and AC voltage range on the multimeter to get the best possible result.
Need help?
Do you have a question about the ElmaFlex 430 and is the answer not in the manual?
Questions and answers