Siemens SITRANS F Operating Instructions Manual page 26

After the meter completes its Initial Makeup command, the [Installed Completed?] option
list changes to:
If you want to redo the Initial Makeup, move cursor to New Makeup, then press the <ENT> key.
This resets the option list. You can now repeat the install routine described previously.
Refer to the FUP1010 Portable field manual for the Empty Pipe Set procedure.
Refer to the FUP1010 Portable field manual for the Zero Flow Adjust procedure.
NOTE: For additional FUP1010 flowmeter functions refer to the FUP1010PFM-3 field
manual.
Install Completed?
6
Yes
New Makeup