Siemens SITRANS F Operating Instructions Manual page 8

Manual Addendum
Gas Flowmeter Flow and VoS Unit Changes
1. Flowmeter Types
Flowmeter configurations included with this change include all SITRANS F Gas Flowmeters (7ME361*).
2. Flow Units
The table below describes the translation from the current gas flow units to the new gas flow units,
where only Cubic Feet and Cubic Meter volume units are affected. Also note that M = thousands and
MM = millions. Mass units and Velocity units remain unchanged.
Note: The flow legend changes depending upon the selection of Standard Volume enabled or
disabled.
For STD VOLUME disabled
Version 3
CU FT/SEC
CU FT/MIN
CU FT/HR
CU FT/DAY
KCU FT/SEC
KCU FT/MIN
KCU FT/HR
KCU FT/DAY
MCU FT/SEC
MCU FT/MIN
MCU FT/HR
MCU FT/DAY
CU M/SEC
CU M/MIN
CU M/HR
CU M/DAY
KCU M/SEC
KCU M/MIN
KCU M/HR
KCU M/DAY
MCU M/SEC
MCU M/MIN
MCU M/HR
MCU M/DAY
Version 3
Vs Min m/s
Channel/Path Setup
Vfmax GAL/MIN
Date Site Created:
Empty %
Analog Output Trim
Pick flowtube size and type
Empty Flowtube Set
FLOW UNITS
Version 5
ACFS
ACFM
ACFH
ACFD
MACFS
MACFM
MACFH
MACFD
MMACFS
MMACFM
MMACFH
MMACFD
M3/sec
M3/min
M3/hr
M3/day
E3 M3/sec
E3 M3/min
E3 M3/hr
E3 M3/day
E6 M3/sec
E6 M3/min
E6 M3/hr
E6 M3/day
Version 5
Vs Min M/S
Chan/Path Setup
Vfmax
Site Created:
Empty
Analog Out Trim
Select flowtube
and start operation
Empty Pipe Set
For STD VOLUME enabled
Version 3
CU FT/SEC
CU FT/MIN
CU FT/HR
CU FT/DAY
KCU FT/SEC
KCU FT/MIN
KCU FT/HR
KCU FT/DAY
MCU FT/SEC
MCU FT/MIN
MCU FT/HR
MCU FT/DAY
M/SEC
CU M/MIN
CU M/HR
CU M/DAY
KCU M/SEC
KCU M/MIN
KCU M/HR
KCU M/DAY
MCU M/SEC
MCU M/MIN
MCU M/HR
MCU M/DAY
A-2
1010FMA-56
Version 5
SCFS
SCFM
SCFH
SCFD
MSCFS
MSCFM
MSCFH
MSCFD
MMSCFS
MMSCFM
MMSCFH
MMSCFD
NM3/sec
NM3/min
NM3/hr
NM3/day
E3 NM3/sec
E3 NM3/min
E3 NM3/hr
E3 NM3/day
E6 NM3/sec
E6 NM3/min
E6 NM3/hr
E6 NM3/day