Appendix; Changing Storage Locations For Images And Videos; Control Stick Navigation; Dji Go Share - dji Smart Controller User Manual

Appendix

Changing Storage Locations for Images and Videos

After linking, you can use DJI GO 4 to select to store images and videos on the aircraft. Users can
also use DJI GO 4 to select to store images and videos to the Smart Controller or on the microSD
card in the Smart Controller.
Auto Sync HD Photos:
Power on the remote controller and the aircraft, and make sure they are linked. Run DJI GO 4, and
enter the camera view. Tap
high resolution to the microSD card in the remote controller at the same when the microSD card in
the aircraft stores the images.
Store to Smart Controller:
Power on the remote controller and the aircraft, and make sure they are linked. Run DJI GO 4, and enter
camera view. Tap
To cache images and videos to the remote controller, enable "Cache Locally When Recording".
To store images and videos to the microSD card in the remote controller, enable "Download
Footage to External SD Card".
When "Download Footage to External SD Card" is enabled, all the selected images will be
downloaded to the remote controller's microSD card when downloading the images to the remote
controller in playback.
The "Cache Locally When Recording" and "Download Footage to External SD Card" are
disabled by default.
To enable "Download Footage to External SD Card", make sure a microSD card is
inserted into the remote controller.

Control Stick Navigation

Tap Control Stick Navigation in Settings. Users can enable or disable the control sticks and 5D
button to navigate on the remote controller. Control Stick Navigation is not available when the
remote controller is linked to an aircraft, even if it is enabled beforehand.
Control Sticks: Move up, down, right, or left to navigate. It is not possible to confirm a selection with
the control sticks.
5D Button: Push up, down, right, or left to navigate. Press to confirm a selection.
As the control sticks and 5D button may not be compatible with third-party apps, it is
recommended to use the touchscreen to navigate when using third-party apps.

DJI GO Share

The videos and images downloaded to the Smart Controller from DJI GO 4 can be wirelessly
transferred to other smart devices. Follow the steps below to use DJI GO Share.
1. Power on the remote controller and swipe down from the top of the screen to open Quick
Settings. Tap
©
16
2019 DJI All Rights Reserved.
> and enable "Auto Sync HD Photos". All images will be stored in
> :
and a QR code will appear.