Calibrating The Compass - dji Smart Controller User Manual

Checking the available button combinations
Hold the Back button until the controller vibrates to check button combinations:
11:30 11:30
Brightness Mode
Adjust Volume
Screen Recording
Screenshot
Press the
Using Button Combinations
The functions of the button combinations cannot be changed. The following table displays the
function of each button combination.
Button Combinations
Function Button + Right Wheel
Function Button + Left Wheel
Function Button + Record Button
Function Button + Focus/Shutter Button
Function Button + 5D Button (up)
Function Button + 5D Button (down)
Function Button + 5D Button (left)
Function Button + 5D Button (right)

Calibrating the Compass

After the remote controller is used in places with electro-magnetic interference, the compass
may need to be calibrated. If the attitude indicator is abnormal in DJI GO 4, calibrate the remote
controller manually. Follow the steps below to calibrate your remote controller.
1. Enter the App Center, tap
2. Follow the diagram on the screen to calibrate your remote controller.
3. The user will receive a prompt when the calibration is successful.
button until the remote controller vibrates, then press the corresponding button to enbale a certain feature.
Button Combinations
, and scroll down and tap Compass.
DJI Smart Controller User Manual
Description
Adjust the system volume
Adjust the screen brightness
Record the screen
Screenshot the screen
Return to Homepage
Open Quick Settings
Check recently opened apps
Open App Center
©
50% 100%
Home
Quick Settings
Recent
Apps
2019 DJI All Rights Reserved.
19