dji Smart Controller User Manual page 13

T-mode (Tripod): The aircraft utilizes GPS and vision systems to locate itself, stabilize, and navigate
between obstacles. In this mode, the maximum flight speed is limited to 2.2 mph (3.6 kph). The
responsiveness to stick movements is also reduced for smoother, more controlled movement.
P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes GPS,
Vision Systems, and an Infrared Sensing System to stabilize, avoid obstacles, and track moving
subjects. Advanced features such as TapFly and ActiveTrack are available in this mode.
S-mode (Sport): The handling gain values of the aircraft are adjusted to enhance aircraft
maneuverability. Note that Vision Systems are disabled in this mode.
Regardless of the position the switch is in on the remote controller, the aircraft begins in P-mode
by default. To switch flight modes, first go to camera view in DJI GO 4, tap
Flight Modes". After enabling multiple flight modes, toggle the switch to P and then to S or T to
switch flight modes.
Refer to the flight modes section in the aircraft's user manual for more information about
flight mode features for different aircraft types.
RTH Button
Press and hold the RTH button to start Return to Home (RTH) and the aircraft will return to the last
recorded Home Point. Press the button again to cancel RTH and regain control of the aircraft. Refer
to the Return to Home section in the aircraft's user manual for more information about RTH.
Position
T
位置T
Position T
P
位置P
Position P
S
位置S
Position S
DJI Smart Controller User Manual
Flight Mode
T-mode (Tripod)
P-mode (Positioning)
S-mode (Sport)
and enable "Multiple
©
2019 DJI All Rights Reserved.
11