STEP 5. Set Upper Frame Cover (41) on Upright (45) and connect Upper Controller Wire
(51) with Middle Controller Wire (31). Attach Upright to Frame (1) with Bolts (152)
and Washers (148, 154).
STEP 6. Insert Upper Control Wire (51) into back tie-in of the Computer (138) and connect
Hand Pulse Wire (52) with Computer Outer Wire. Attach Computer on Upright
(45) with Bolts (140).
20155 Ellipse • Foothill Ranch • CA • 92610 • www.bladezfitness.com
ASSEMBLY INSTRUCTIONS CONTINUED
BLADEZ FITNESS • BH North America Corporation
BLADEZ BF-850E Elliptical
10