Commissioning; Commissioning The Complete System - Festo HSW-x-AP Series Operating Instructions Manual

HSW−...−AP/A S
7

Commissioning

Commissioning the complete system

Slowly pressurize the complete system. This will prevent uncontrolled
S
movements from occurring.
Warning
S Make sure that:
no−one can reach into the traversing
range/gripping range
there are no foreign objects in the
traversing range/gripping range
there are no hose lines in the
traversing range/gripping range.
S Protect the area e.g. by means of a
cover or screen.
Please note
The operating conditions for the setting procedure (operating pressure,
ambient temperature) must be identical with those in continuous operation.
Otherwise there is a danger of the handling module being overloaded.
Please note
For HSW−...−AP:
S Handle the shock absorber with care so that the thread, the piston rod and
the outer cylinder are not damaged.
S Make sure that the shock absorbers are screwed in completely and locked
(as supplied from the factory).
If the shock absorbers are not screwed in completely, the cushioning effect
will be considerably reduced (reduced cushioning stroke).
Festo HSW−...−AP/AS 0812b English
Fig. 21
47