that is sent to server has to be multiplied by 0.5. FEFC has resolution of 0.4%/bit gain, so it
has to be multiplied by 0.4. FEE5 has 0.05 h/bit gain – multiplier is 0.05.
FMS standard interface description indicates that fuel consumption is parameter with ID
FEE9:
Downloaded from
www.Manualslib.com
Note: Averaging constant cannot be used with CAN data, because this
information comes in digital format. So in order to prevent data loss, set
Averaging constant parameter to 1.
32 Figure CAN parameters configuration examples
Most parameters have certain resolution. FEE9 parameter has 0.5L/bit gain, so value
Data parsing is preceded by selecting correct message from all available on CAN bus.
manuals search engine
41