Full Integration With Your Emr System (Only A12C And A16) - PLUSOPTIX A12C Short Manual

3 Full integration with your EMR system (only A12C and A16)

As an alternative to manual entry of the patient data, the plusoptiX A12C and A16 can also
be connected for a full integration with your EMR system.
Data files
Interface EMR
Device
EMR
Figure 5: Automated connection to your Electronic Medical software
You simply have to choose a patient in your EMR system, and transfer the data to the
device. After the measurement, the measurement results and the measurement report will be
retransferred and saved to your EMR system.
The measurement report can be printed on any printer that is connected with your network or
workstation computer.
Figure 6: Automated transfer of patient data and measurement results
More information about csv file based EMR interface can be found on our homepage
(www.plusoptix.com), under support.
Seite 8 von 8