Position Of The Mounting Clips For Ip66-Complaint Installation - Siemens SIMATIC HMI series Operating Instructions Manual

Installing and connecting the device
3.2 Installing the built-in unit
Mounting with optional mounting brackets
Mounting brackets can be used instead of mounting clips in steps 1 to 5:
3.2.4

Position of the mounting clips for IP66-complaint installation

Positions of the mounting clips
To achieve IP66 degree of protection instead of IP65 for a device with capacitive multi-touch
screen, fasten 4 additional mounting clips (available as accessories) at the positions marked
by the red boxes. The 15" display meets IP66 even without additional mounting clips.
Device
Touch screen device with:
•
•
48
19" display
22" display
Position
IFP, IFP PRO, IFP ETH
Operating Instructions, 11/2017, A5E31298376-AH