Brightness / Contrast; Color Temperature; Frequency / Phase; Status - Siemens SCD 1898-I Instruction Manual

01.02
4.4.1

Brightness / Contrast

The picture brightness (not backlight) and the contrast are adjusted here.
4.4.2

Color temperature

Four different color temperature values are available here (9500 K, 8500 K,
6500 K, 5000 K).
• The desired temperature is selected by pressing the SUB menu key.
• Pressing the "UP" key calls up a sub menu where the selected color
temperature value can be adjusted.
There are three adjustment elements for the three colors, allowing the desired
color temperature or color tone, to be set.
4.4.3

Frequency / Phase

The frequency setting allows the pixel clock frequency to be adjusted.
This will only have to be adjusted if the automatic alignment was unable to
determine the correct pixel clock frequency.The phase setting allows slight picture
disturbances to be eliminated.
4.4.4

Status

This displays the current display resolution and the horizontal and vertical
frequencies.
4.4.5

Position

This menu point allows the picture to be shifted in the horizontal and vertical
directions.
4.4.6

Scaling

This contains four sub menu points which influence the manner in which images of
greater or lesser resolution than that of the display are represented.
Horizontal / Vertical Pan
This setting enables the screen contents to be shifted horizontally and vertically
when pictures with a greater resolution than the display are shown. This requires
"Normal Scaling Modes" to be set to "One to One".
If, e.g., a 1280 x 1024 picture is to be shown on a display of 1024 x 768 pixels
then, with the "One to One" setting, only a part of the entire picture will be visible.
Here, the desired part of the entire image can be displayed.
High-Resolution 18" LCD Monitors SCD 1898-I/IT
A5E00120696
Instruction manual
29