Standard Version; Extended Version, Pro Device - Siemens SIMATIC HMI series Operating Instructions Manual

Installing and connecting the device
3.4 Connecting the device
3.4.4.2

Standard version

Procedure
1. Connect the Flat Panel and the PC using a DVI or DisplayPort
2. If using a Touch version, also connect the device and the PC
3.4.4.3

Extended version, PRO device

Procedure
1. Connect the Flat Panel and the PC
2. If the distance between the Flat Panel
3. If the distance between the Flat Panel
Note
Data transfer per USB transmitter module via USB1.1. The data transmission rate
corresponds to Full Speed according to USB1.1.
66
line.
with a USB line.
using a DVI or DisplayPort line by
means of the respective interface.
and the PC is less than 5 m, connect
the Flat Panel and PC using the USB
Type B interface.
and the PC is more than 5 m, connect
the Flat Panel and PC with USB
transmitter module by means of the
USB-Link interface.
IFP, IFP PRO, IFP ETH
Operating Instructions, 11/2017, A5E31298376-AH