Siemens SIMATIC HMI series Operating Instructions Manual page 4

Preface
A touch device generally refers to a device with a touch screen, as opposed to a pure
"display device". Touch screen is the general term for a capacitive multi-touch screen and
resistive single touch screen.
The devices IFP1500, IFP1900, IFP2200, IFP1900 ETH and IFP2200 ETH are referred to as
"built-in units".
The devices IFP1900 PRO and PRO IFP2200 are referred to as "PRO devices".
At some places in these operating instructions, the general term "Windows Embedded
Standard" is used to refer to "Windows Embedded Standard 2009" and "Windows
Embedded Standard 7". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate".
Figures
This manual contains figures of the described devices. The supplied device may differ in
some details from the figures. Within some of the figures, one device is used to represent all
Industrial Flat Panels.
History
The following earlier release versions of these operating instructions have been published:
Edition
09/2012
06/2014
11/2014
06/2015
07/2015
07/2016
11/2016
11/2017
4
Comment
First Edition
Description of devices with capacitive multi-touch screen
Update with IPC Wizard 2.1 and corrections
The description of the following devices has been added:
SIMATIC IFP1900 PRO for pedestal (extendable, flange bottom)
•
SIMATIC IFP1900 PRO for support arm (not extendable, flange top)
•
SIMATIC IFP1900 ETH, IFP2200 ETH
•
Corrections
The description of the following devices has been added:
SIMATIC IFP1900 PRO for support arm (extendable, round tube)
•
SIMATIC IFP2200 PRO for pedestal (extendable, flange bottom)
•
SIMATIC IFP2200 PRO for support arm (not extendable, flange top)
•
SIMATIC IFP2200 PRO for support arm (extendable, round tube)
•
Additions:
System components for PRO devices: Extension Unit
•
Mounting of PRO devices for support arm (extendable, round tube) on a
•
48.3 mm round tube
Information on USB interfaces of Ethernet Monitors
•
Information about standards, certificates and securing of cables for Ex ap-
•
proval
Corrections
SIMATIC IFP1900 PRO and SIMATIC IFP2200 PRO: Dimensions for die-cast
aluminum housing updated.
IFP, IFP PRO, IFP ETH
Operating Instructions, 11/2017, A5E31298376-AH