Downloading Software Updates – An Overview; Downloading Software Updates On The Workplace Computer - PLUSOPTIX S12C Short Manual

1 Downloading software updates – an overview
We recommended checking regularly to see if there is a new software version to download. If
your Plusoptix Vision Screener is already up-to-date, the message "The software version is
up-to-date" will be shown. To download a software update, you will need an empty SD card
(plusoptiX 12) or USB stick (plusoptiX 16).
You have following options to download the latest software version:
- Downloading software updates on the workplace computer (see chapter 2)
- Downloading the software update directly onto the Plusoptix Vision Screener (LAN/WLAN
or Mini-USB) (see chapter 3)
- Downloading Software Update via LAN/WLAN (only plusoptiX S12C and S16) (see
chapter 4)
- Downloading Software Update via Mini-USB-cable (only S12C and S12R) (see chapter 5)
Attention:
During the update process, all the data saved on the SD card or USB stick will be
deleted. For this reason, make sure you only use an empty storage medium.
Note:
After the software update has been installed, you will see a message about
formatting the SD card or USB stick. Confirm this message if you want to use the
SD card or USB stick to save screening reports after the update. Do not format it
if you want to use it to update further Plusoptix Vision Screeners.

2 Downloading software updates on the workplace computer

If you cannot establish an internet connection to the Plusoptix Vision Screener, the software
update can also be downloaded to the workplace computer.
The latest software update and instructions to update the software can be found on our
homepage www.plusoptix.com.
Seite 3 von 6