"Database" Results Page (Only Plusoptix A12C And A16); Figure 3: "Database" Results Page - PLUSOPTIX A12C Short Manual

4 "Database" results page (only plusoptiX A12C and A16)

Every successful measurement is automatically documented in the database in chronological
order. Green entries indicate successful measurement results. Inconclusive measurements
are not saved.
Documenting the
measurement results
After a measurement, the measurement values can be saved as a measurement report and
printed as a label. Touch the printer (1) button in the navigation bar of a results page to
assign patient data, and to send the print job via the infrared interface and save a
measurement report on the SD card (plusoptiX 12) / USB stick (plusoptiX 16). For more
information about the documentation of measurement results, please see supplementary
short manual 5 and 6.
Attention:
All print jobs in print spooler are deleted once device is switched off or switches
off for power saving automatically. Measurement reports saved to a SD-card /
USB stick are not deleted when device is switched off or switches off for power
saving.

Figure 3: "Database" results page

1)
Seite 6 von 7