Preventive Maintenance Checks And Services (Pmcs) - Isuzu C-240PW-28 Technical Manual

Section I. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
3-1. PMCS PROCEDURES.
3-1.1. General.
To ensure that engine is ready for operation at all times, it must be inspected so defects can be discovered
and corrected before they result in serious damage or failure.
conjunction with performance of engine PMCS. For engine PMCS, refer to TABLE 3-1.
Table 3-1. Preventive Maintenance Checks and Services (PMCS)
Item
Interval
No.
M Q S A
1
2
3
4
CHAPTER 3
MAINTENANCE
Item
to be
B H
Inspected
300 Oil Filter
750 PCV System
1500 Cylinder Head
Bolts
3000 Engine Valve
Clearances
ARMY TM 9-2815-254-24
AIR FORCE TO 38G1-94-2
Perform operator's PMCS prior to or in
Procedures Check
for and have
repaired or adjusted
as necessary
Change oil filter.
Refer to paragraph
3-14.1.
NOTE
Oil filter change inter
val is a hard time
replacement to be
used when AOAP
lab is not available.
Service PCV system.
Refer to paragraph
3-20.
Torque cylinder head
bolts. Refer to
paragraph 3-27.6d.
NOTE
Valve clearance
must be checked
after cylinder head
bolt tightening has
been done. Refer to
step 3 in this table.
Adjust engine valve
clearances. Refer to
paragraph 3-26.6.
Equipment is
Not/Ready
Available
If:
C h a n g e 2 3 - 1