Table of Contents
Advertisement
If housing (11) is difficult to separate from field coil (24) tap lightly
with plastic mallet.
f.
Remove housing (11) from field coil (24).
g.
Remove positive brushes (12) (attached to field coil) from brush holder (15) by raising brush
spring (13) and removing brush from holder.
h.
Raise springs (13) on negative brushes (14). Raise negative brushes part way off commutator
and hold in this position by setting spring against brush.
Remove brusher holder (15).
i.
Note installation of shift fork (20) to aid in assembly.
j.
Remove nut (16) lockwasher (17) and stud (19) securing shift fork (20) in gear case (23).
k.
Remove dust covers (21 and 22).
I.
Remove gear case (23).
m. Remove shift fork (20).
n. Remove field coil (24).
To remove pinion stopper (26) move stopper toward armature to
expose retainer ring.
o.
Remove washer (25) pinion stopper (26) and clutch (27) from armature shaft (18).
p.
Remove bracket (28) with center metal (29) from armature shaft.
Note from which end of shaft washers (7 and 30) come.
q.
Remove thrust washers (7 and 30) from armature shaft.
NOTE
NOTE
NOTE
NOTE
ARMY TM 9-2815-254-24
AIR FORCE TO 35G1-94-2
Change 2 3-87
Hide quick links:
Advertisement
Table of Contents
