Table of Contents
Advertisement
ARMY TM 9-2815-254-24
AIR FORCE TO 38G1-94-2
e.
Remove fluid passage bolt (7) securing fuel tube (9) to fluid passage bolt (7). Remove and discard two seals
(8). Cap openings.
f.
Disconnect fuel return line (10) to facilitate removal of fluid passage bolt (11). Cap openings.
g.
Remove fluid passage bolt (11) securing fuel tube (13) to fitting on top of filter body (15). Removeand discard
two seals (12).
h.
Remove two bolts (14) securing filter body (15) to bracket (19); remove filter assembly.
i.
If necessary, remove two bolts (16), washers (18) and lockwashers (17) securing bracket (19); remove
bracket. Discard lo&washers (17).
3-9.2. Disassembly.
a.
Remove drain plug (1, FIGURE 3-3) and preformed packing (20) from thru-bolt (21). Discard preformed pack-
ing (20).
b.
Remove thru-bolt (21) and remove preformed packing (22), filter bowl (23), and preformed packing (24) from
body (15). Discard preformed packings (22 and 24).
c.
If replacing entire filter assembly, remove and retain fitting (25).
3-9.3. Assembly.
a.
Position new preformed packing (22, FIGURE 3-3) on thru-bolt (21). Position new preformed packing (24)
and filter bowl (23) on body (15) and secure with thru-bolt (21). Tighten thru-bolt to 22 ft-lbs (29.8 Nm).
b.
Install new preformed packing (20) and drain plug (1) into thru-bolt (21).
c.
If removed, install fitting (25).
3-9.4. Installation.
a.
If removed, position bracket (19, FIGURE 3-3) on engine block and secure with two bolts (16). new lockwash-
ers (17), and washers (18).
3-22
Hide quick links:
Advertisement
Table of Contents
