Table of Contents
Advertisement
3-14.
OIL FILTER.
3-14.1. Cartridge Replacement.
a.
Drain lubrication system, refer to end item maintenance manual.
b.
Loosen cartridge (1, FIGURE 3-38) by turning counterclockwise with a filter wrench.
c.
Discard used cartridge.
d.
Wipe filter head (2) with a clean rag.
e.
Apply light coat of oil to new cartridge (1) gasket.
f.
Place cartridge on filter head (2) and turn clockwise until cartridge is hand-tight on head.
Using filter wrench, turn cartridge an additional 1 to 1-1/4 turns.
g.
h.
Service lubrication system, refer to end item maintenance manual.
i.
Operate engine and check for leakage.
3-14.2. Removal.
a.
Drain lubrication system, refer to end item maintenance manual.
b.
Remove four screws (3, FIGURE 3-38) securing filter head (2) to engine; remove filter head and
o-ring (4).
c.
Cover opening to prevent entry of dirt.
3-14.3. Installation.
a.
Wipe engine and filter head (2, FIGURE 3-38) mating areas with a clean rag.
b.
Install o-ring (4). Position head (2) on engine and secure with four screws (3). Tighten screws to
168 in-lbs (19.0 Nm).
SECTION VI. LUBRICATION SYSTEM
Cartridge (1) does not have to to be removed to remove head.
NOTE
ARMY TM 9-2815-254-24
AIR FORCE TO 38G1-94-2
Change 2
3-69
Hide quick links:
Advertisement
Table of Contents
