Default Setting; Reboot; Advanced; Log - Escene WS118 User Manual

WS118 IPPhone
NOTES: It's not necessary to input filename when doing backup Configuration,
Phone Book, EXT Module.

9.1.4 Default Setting

You can load the phone to the factory default setting in default setting option.
Press the 'Reset to Factory Setting' option, the phone will load to factory default setting on next

reboot.

9.1.5 Reboot
You can use reboot option to reboot the phone.

9.2 Advanced

9.2.1 Log

This feature is use for the administrator to managing the equipment, like debugging, SIP etc,. If
you need to catch a debugging Level, you need to setup on this interface.
www.escene.cn/en/
Escene Communication