KTM 125 Duke 2017 Owner's Manual page 74

9 RIDING INSTRUCTIONS
–
Unlock the steering. (
–
Sit on the vehicle, take the weight off of the side stand, and move up all the way.
–
Turn the emergency OFF switch to the position
–
Switch on the ignition by turning the ignition key to the position
After you switch on the ignition, you can hear the fuel pump working for about two
seconds. The function check of the combination instrument is run at the same
time.
–
Shift gear to neutral.
The green idle indicator lamp N lights up.
B00782-10
The ABS indicator lamp lights up and goes back out after starting off.
–
Press the electric starter button
Info
Do not press the electric starter button until the combination instrument func-
tion check is finished.
When starting, DO NOT open the throttle. If you open the throttle during the start-
ing procedure, fuel is not injected by the engine management system and the
engine cannot start.
Press the starter for a maximum of 5 seconds. Wait for a least 5 seconds before
trying again.
This motorcycle is equipped with a safety starting system. You can only start
the engine if the transmission is in neutral or if the clutch lever is pulled when
a gear is engaged. If the side stand is folded out and you shift into gear and
release the clutch, the engine stops.
p. 28)
.
.
72
.