18
SERVICE WORK ON THE ENGINE
1
0 0 1
Main work
–
Remove filler plug
Engine oil (SAE 15W/50) (
Engine oil (SAE 10W/40) (
Info
In order to achieve optimal engine performance, it is not advisable to mix differ-
ent engine oils.
We recommended changing the engine oil when necessary.
401955-10
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
1
and the O-ring from the clutch cover, and fill up with engine oil.
p. 186)
p. 186)
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
p. 156)
160