KTM 125 Duke 2017 Owner's Manual page 41

7 COMBINATION INSTRUMENT
The indicator lamps offer additional information about the operating state of the motorcycle.
When the ignition is switched on, all indicator lamps light up briefly.
Possible states
The turn signal indicator lamp flashes green simultaneously with the turn signal – The turn signal is switched on.
Malfunction indicator lamp lights up yellow – The OBD has detected an emission- or safety-critical fault.
ABS indicator lamp lights up yellow – Status or error messages relating to ABS.
The idle indicator lamp lights up green – The transmission is in idle.
The oil pressure warning lamp lights up red – The oil pressure is too low.
Alarm system indicator lamp flashes red – Status message on the alarm system (optional).
The high beam indicator lamp lights up blue – The high beam is switched on.
The general warning lamp lights up yellow – An operating safety (warning) message was detected. This is also
shown on the display.
39