KTM 125 Duke 2017 Owner's Manual page 125

14 WHEELS, TIRES
–
Pull the rear wheel back and mount wheel spindle
adjuster 4
Guideline
Mount left and right chain adjusters
–
Mount nut
–
Push the rear wheel forward so that the chain adjusters are in contact with the screws,
and tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to reference markings
Nut, rear wheel spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed sensor holder
F00745-12
–
Mount and tighten screw
Guideline
Screw, chain guard
F00776-11
.
4
2
and washer.
2
.
5 in the drill hole.
6
.
7 .
3 with the washer and chain
in the same position.
M14x1.5 98 Nm
(72.3 lbf ft)
M6 8 Nm (5.9 lbf ft)
EJOT PT ® K60x30 7 Nm (5.2 lbf ft)
123
B .