KTM 125 Duke 2017 Owner's Manual page 152

16 COOLING SYSTEM
Main work
–
Remove radiator cap
F00763-11
–
Loosen bleeder screw
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the bleeder screw, and then mount
and tighten the bleeder screw immediately.
Coolant (
–
F00766-10 Completely fill the radiator with coolant. Mount the radiator cap.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and death.
–
–
1
.
2
.
p. 185)
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
150