12
SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear.
»
If in area
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
»
If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain sliding guard
F00752-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
C
by the chain sliding guard screw
1
is visible from above:
M6
7 Nm (5.2 lbf ft)
p. 88)
101