Ordering Information; Pump Part Numbers - Watson-Marlow qdos20 User Manual

28

Ordering information

28.1

Pump part numbers

0 M 0
Model
1: Qdos 20
2: Qdos 30
Tube material
3: Qdos 60
2: Santoprene
4: Qdos 120
8: SEBS
Digital I/O type
Manual, Remote and PROFIBUS models
L: Standard pump varient
Universal and Universal+ models
L: Open collector outputs, 5 - 24V DC inputs
H: Volt free 110V AC relay contacts, 110V AC inputs
(only available with US mains leads)
R: Volt free 110V AC 30V DC relay contacts, 5 - 24V DC inputs
* The pumphead side location is required when ordering. The left/right perspective
assumes the user is looking at the front of the pump. The pump in the dimensions diagram
is considered a pumphead located to the left.
** Important note: The ReNu pumphead contains lubricant. It is the user's responsibility to
comply with local health and safety regulations, including ensuring chemical compatibility
between the lubricant and the duty fluid before use. The standard lubricant is PFPE. The
qdos30 standard lubricant is silicone oil.
† To choose the best tube for your duty fluid please use the chemical compatibility chart at
www.qdospumps.com
m-qdos-en-02
• • •
Model
1: Remote
3: Manual
†
4: Universal
5: Universal+
7: PROFIBUS
Left hand mounted
pumphead
• G •
Pumphead
orientation*
L = Left
R = Right
•
Plug options
A: US
E: European
U: UK
K: Australia
R: Argentina
C: Swiss
D: India, South Africa
B: Brazil
123