Ordering Information; Pump Part Numbers - Watson-Marlow qdos30 Manual

m-qdos30-manual-11

21 Ordering information

21.1 Pump part numbers

Tube
2: Santoprene †
8: SEBS †
Digital I/O
Manual, Remote and PROFIBUS models
L: Standard pump varient
Universal and Universal+ models
L: Open collector outputs, 5 - 24V DC inputs
H: Volt free 110V AC relay contacts, 110V AC inputs
(only available with US mains leads)
R: Volt free 110V AC relay contacts, 5 - 24V DC inputs
* The pumphead side location is required when ordering. The left/right perspective
assumes the user is looking at the front of the pump. The pump in the dimensions
diagram is considered a pumphead located to the left.
** Important note: The ReNu pumphead contains lubricant. It is the user's
responsibility to comply with local health and safety regulations, including ensuring
chemical compatibility between the lubricant and the duty fluid before use. The
standard lubricant is silicone oil. The lubricant is PFPE.
† To choose the best tube for your duty fluid please use the chemical compatibility
chart at www.qdospumps.com
Model
1: Remote
3: Manual
4: Universal
5: Universal+
7: PROFIBUS
Pumphead Lubricant **
G: General purpose lubricant
Plug options
A: US
E: European
Pumphead
U: UK
orientation* K: Australia
R: Argentina
L = Left
C: Swiss
R = Right
D: India, South
Africa
59