Table of Contents
Advertisement
4. Function Keys: Press F1, F2, F3, or F4 to activate the assigned function. The
default assignments are as listed in Table 2-1. The action of each Function Key
can be selected from a wide variety of actions in the User Config Menu as
described in Table 2-8.
5. OK: Press this button to display the OSD Menu. When the OSD Menu is
displayed, pressing this button accepts selections in the menus and sub-menus.
Refer to the OSD Menus section of this chapter for operation and content of
these menus.
6. Left: When the OSD Menu is not being displayed, pressing this button displays
the Quick Menu, and cycles through frequently used volume and image controls.
Refer to the Quick Menu section of this chapter. When the OSD Menu is
displayed, the Left button navigates horizontally through the sub-menu
selections.
7. Down: When the OSD Menu is displayed, the Down button navigates down
through the menu and sub-menu selections and can be used to adjust the
settings. It also adjusts the items in the Quick Menu.
8. Up: When the OSD Menu is displayed, the Up button navigates down through
the menu and sub-menu selections and can be used to adjust the settings. It
also adjusts the items in the Quick Menu.
9. Right: When the OSD Menu is displayed, the Right button navigates
horizontally through the sub-menu selections.
10. Spkr: These are the locations of the left and right speakers.
11. Headphone: An 1/8" jack for a stereo headphone appears on the front panel. A
headphone is not supplied.
On-Screen Display Features
Functions and parameters can be selected and adjusted using the On Screen
Display (OSD) Menu. Refer to the OSD Menus section of this chapter.
Overlays can be added by the operator for Area & Safety Markers, Center
Marker, and to display names as IMD (In Monitor Display) for identification.
Video effects such as Monochrome, Blue Only, and other features can be used to
assist setup. For convenience and quicker access, these and other features can be
assigned to the Function Keys.
Audio level meter displays, for up to sixteen channels, can be displayed at the left
or right sides of the display. They can show VU, PPM (PK) or both and have
assignable -20db or -18db reference levels.
Table 2-1: Default Function Key Actions
Key
Default Action
F1
Color Comparison
F2
Scan
F3
Aspect
F4
Blue Only
Page 9
Advertisement
Table of Contents
