Table of Contents
Advertisement
Using the Quick Menu and the OSD Menus
In the following descriptions, refer to Figure 2-5 for the location of each control
button.
Quick Menu
The Quick Menu provides quick access to a few commonly used features, as listed
in Table 2-4. The Quick Menu appears as shown in Figure 2-6.
The following is a description of how to use the Quick Menu:
1. Press the Left button to display the Quick Menu and the first item that can
be adjusted.
2. Use the Up and Down buttons to change the value for the item displayed.
3. Press the Left button again to display the next adjustable item.
4. The Quick Menu will time out with no button presses. Alternatively, you may
press the Left button repeatedly when finished until the menu disappears.
Table 2-3: RS-485 I/O Connections
Pin
RS-485 Terminal Name
1, 2
GND
3
Tx- (pair A)
4
Rx+ (pair B)
5
Rx- (pair B)
6
Tx+ (pair A)
7, 8
NC
Figure 2-5: Screen Control Buttons
Figure 2-6: Quick Menu - Volume Setting
Page
13
Advertisement
Table of Contents
