Related Manuals for Wohler RMQ-230-3G-TT
Summary of Contents for Wohler RMQ-230-3G-TT
-
Page 1: User Guide
RMQ-230-3G-TT 23” Audio/Video Quad Split Tabletop Monitor User Guide Part Number 821097, Revision B... - Page 2 In no event will Wohler Technologies, Inc. be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the hardware, software, or its documentation, even if advised of the possibility of such damages.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Contents User Guide ..................1 TABLE OF CONTENTS................3 Contents ......................3 CHAPTER 1: Installation ................5 Introduction ....................5 Overview....................5 Features ....................5 Safety......................5 Instructions ...................5 Safety Symbols..................6 Mounting....................6 Heat Dissipation..................7 Sympathetic Vibration................7 Mechanical ....................7 Electrical Interference ................7 Power ....................7 Compliance .....................8 FCC ......................8 ICES-003 ....................8 CHAPTER 2: Local Operation ..............9... - Page 4 Option - Video Color Temperature Menu............33 Option - Audio Config Menu ................34 Option - Window Marker Menu ................. 35 Opton - Window Display Menu ................. 36 Option - Window IMD Menu ................37 Option - Window Function Menu ............... 38 Option - Global User Menu................
-
Page 5: Chapter 1: Installation
CHAPTER 1: Installation Introduction Overview The RMQ-230-3G-TT Quad Split monitor sets a new standard in LCD monitors for broadcast and professional video applications. The RMQ-230-3G-TT is a tabletop monitor that provides a 23”, 8-bit, 1920 x 1080 resolution, 16:9 format, anti-glare IPS LCD screen. -
Page 6: Safety Symbols
Important: By design, this monitor will only plug into a three-prong outlet for your safety. If the plug does not fit into the outlet, contact an electrician to replace the obsolete outlet. 7. Protect the power cord from being walked on or pinched, particularly at plug connection on the equipment and at the socket. -
Page 7: Heat Dissipation
Heat Dissipation The ambient temperature near the product should not exceed 40° Celsius (104° Fahrenheit). In warm environments, allow an inch of space above and below the unit for air circulation. Important To reduce noise, the monitor does not have any fans. As a result, the heat generated by the audio amplifiers, power supplies, and other components is vented by slots in the back of the unit. -
Page 8: Compliance
Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 9: Chapter 2: Local Operation
CHAPTER 2: Local Operation The RMQ-230-3G-TT front and rear panels and menus are described in this chapter. Front Panel Figure 2–1: Front Panel Layout 1. Tally Lights: This tri-color (red/green/amber) light is controlled through a RJ45 connector or through the Tally connector on the rear panel. For details on these connectors, refer to the Rear Panel section of this chapter. - Page 10 the rear panel. The selected input source is indicated when one of the Input buttons is pressed. These buttons are used to select which audio source will be monitored audibly and also which Input Split window will be adjusted by the OSD Menus.
-
Page 11: On-Screen Display Features
settings. It also adjusts the settings in the Quick Menu. 11. Up: When the OSD Menu is displayed, the Up button navigates down through the menu and sub-menu selections and can be used to adjust the settings. It also adjusts the settings in the Quick Menu. 12.Headphones: A standard 1/8"... - Page 12 Figure 2-3: Display Features 1. Area Marker: Used to mark an alternate aspect ratio area of the image. You can set whether to display it, the brightness, and the matte mode in the Marker Menu. Refer to Table 2-7. 2. Safety Marker: This is used to mark a percentage area, inside of the image, safe for titles to be located.
-
Page 13: Rear Panel
Use of another power adapter provided by the user may negate the compliance or not perform properly. Wohler Technologies cannot accept any responsibility for the outcome in such cases. Page... - Page 14 1. SDI / CVBS In 1: This input connector accepts 3G/HD/SD-SDI video signals. It is compliant with SMPTE 424M, SMPTE 259M, SMPTE292M/ITU-R BT601. This BNC jack also accepts and automatically detects a CVBS signal. It can be viewed as part of the Quad Split or as full screen by pressing the CH1 button.
-
Page 15: Rear Panel Connectors
13. Audio In 3: A pair of analog audio inputs related to the Line 3 video signal is provided on RCA jacks. They have a 47K input impedance and will accept up to a 5dBu signal. These inputs are only active when the corresponding video input is receiving a CVBS signal and are selected when CH3 is pressed. - Page 16 Table 2-2: Tally Input Connections Input Green Ground To light a Tally in red, connect pin 1 (2, 3, or 4) to ground. To light a Tally in green, connect pin 6 (7, 8, or 9) to ground. To light a tally in amber, connect both pins 1 and 6 (2 and 7, 3 and 8, or 4 and 9) to ground.
-
Page 17: Using The Quick Menu And The Osd Menus
Using the Quick Menu and the OSD Menus Refer to Figure 2-7 for the location of each control button. Figure 2-7: Screen Control Buttons Quick Menu Operation The Quick Menu provides quick access to a few commonly used features, as listed in Table 2-4. -
Page 18: Osd Menu Operation
OSD Menu Operation The OSD Menus allow you to adjust a wide variety of control parameters for each Input Split. Refer to Table 2-5 through Table 2-11 for typical values and domain ranges. The following is a description of how to use the OSD Menus: 1. - Page 19 Table 2-5: Status Menu Structure Status Parameters Default Value Domain Range Description Input Split number (IN1 to IN4) that you have selected to view or adjust. D32, D93, D65, COLOR TEMP D56, D50 ASPECT MODE NONE Display only. Cannot be NORMAL, OVER, changed in this menu SCAN MODE...
- Page 20 Table 2-7: Marker Menu Structure Marker Parameters Default Value Domain Range Description OFF (close area marker), AREA MARKER OFF 4:3, 13:9, 14:9, 15:9, Set area marker size. 16:9, 1.85:1, 2.35:1 CENTER Turn center marker OFF, ON MARKER display on or off. SAFETY OFF, 80%, 85%, 88%, Set safety marker...
- Page 21 Table 2-8: Audio Configuration Menu Structure Audio Config Parameters Default Value Domain Range Description Select the audio EXT: Analog Inputs source among the AUDIO SOURCE EBD: SDI & HDMI Inputs available signals. Select the input channel for the SPEAKER L left speaker, headphone, or analog audio out.
- Page 22 Table 2-9: User Config Menu Structure User Config Parameters Default Value Domain Range Description Set the backlight B. LIGHT 0* to 30 brightness.*** ENGLISH, Set the menu LANGUAGE ENGLISH CHINESE language. *** Color adjustment for PHASE 0 to 100 NTSC images. Set picture APERTURE 0 to 100...
- Page 23 Table 2-10: OSD Configuration Menu Structure (Page 1) OSD Config Menu (Page 1) Parameters Default Value Domain Range Description Proceed to Page 2 of the NEXT PAGE OSD Config Menu. Turns the IMD Char text IMD DISPLAY OFF, ON on or off. GREEN Set the color of the IMD IMD COLOR...
- Page 24 Table 2-11: OSD Configuration Menu Structure (Page 2) OSD Config Menu (Page 2) Parameters Default Value Domain Range Description Return to Page 1 of the NEXT PAGE OSD Config Menu. LOCAL TSL3.1 TSL4.0 Select an IMD protocol. IMD PROTOCOL LOCAL IMAGE VIDEO (1510 protocol) 0 to 255 (unit ID...
-
Page 25: Chapter 3: Technical Info
CHAPTER 3: Technical Info Table 3–1: Specifications Specification Values/Domains Power requirements 100 V to 240 VAC ± 10%, 50/60Hz Power consumption 90 Watts RMQ-230-3G 14.5” H x 22.0” W x 6.3” D with tabletop stand 369 mm H x 560 mm W x 160 mm D Weight with stand 17.3 lbs. - Page 26 Figure 3–1: RMQ-230-3G Block Diagram Tally Light Contact Tally Closures Interface UMD / RS-485 SW Update In / Out LCD 23.0" Ethernet 16:9 Quad Split with 16-Channel Audio Meters & OSD Inputs / Outputs HDMI In Video 3G/HD/SD-SDI / CVBS 1 In Decoder 3G/HD/SD-SDI 1 Out 3G/HD/SD-SDI /CVBS 2 In...
-
Page 27: Supported Video Formats
Supported Video Formats The RMQ-230-3G monitor will display the video formats listed in Table 3-2. Table 3-2: Video Formats 3G/HD/ Format CVBS HDMI SD-SDI NTSC 480i60/59.94 576i50 720p50 720p60/59.94 1035i60/59.94 1080i50 1080i60/59.94 1080p50 1080p60/59.94 Page... -
Page 28: Chapter 4: Using Network Control
CHAPTER 4: Using Network Control The RMQ-230-3G Web GUI allows you to customize the monitor configuration to perfectly suit your needs. The following setup steps are not necessary if you intend to use the RMQ-230-3G in its default configuration or if you only make configuration changes using the OSD menus. - Page 29 Figure 4–1: Host IP Settings After making an IP address change such as this, close the control panel and reboot the host computer to be sure the change takes effect. Open your browser and enter the address of the RMQ-230-3G, which will be 192.168.1.56 from the factory. You should see the Initial Screen of the Web GUI, as shown in Figure 4-2.
-
Page 30: Initial Screen
Status Menu The Status Menu does not contain any settable options. It simply lists firmware version numbers within the RMQ-230-3G. Version numbers are additional information that may be useful when consulting with Wohler Customer Service. Figure 4-4: Status Menu Page... -
Page 31: Option - Video Adjustment Menu
Option - Video Adjustment Menu Click the Option tab and then the Adjustment button under the Video heading. The settings in this menu are made individually for each of the four Quad Split windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 32: Option - Video Config Menu
Option - Video Config Menu Click the Option tab and then the Config button under the Video heading. The settings in this menu are made either individually for each of the four Quad Split windows or globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 33: Option - Video Color Temperature Menu
Option - Video Color Temperature Menu Click the Option tab and then the Color Temperature button under the Video heading. The settings in this menu are made either individually for each of the four Quad Split windows or globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 34: Option - Audio Config Menu
Option - Audio Config Menu Click the Option tab and then the Config button under the Audio heading. The settings in this menu are made either individually for each of the four Quad Split windows or globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 35: Option - Window Marker Menu
Option - Window Marker Menu Click the Option tab and then the Marker button under the Window heading. The settings in this menu are made either individually for each of the four Quad Split windows or globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 36: Opton - Window Display Menu
Option - Window Display Menu Click the Option tab and then the Display button under the Window heading. The settings in this menu are made either individually for each of the four Quad Split windows or globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 37: Option - Window Imd Menu
Option - Window IMD Menu Click the Option tab and then the IMD button under the Window heading. The settings in this menu are made individually for each of the four Quad Split windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 38: Option - Window Function Menu
Option - Window Function Menu Click the Option tab and then the Function button under the Window heading. The settings in this menu are made individually for each of the four Quad Split windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 39: Option - Global User Menu
Option - Global User Menu Click the Option tab and then the User button under the Global heading. The settings in this menu are made globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 40: Control - Window Menu
Control - Window Menu Click the Control tab and then the Global button. The settings in this menu are made globally for all the windows. The Refresh button will retrieve the settings from the RMQ-230-3G, although this is done automatically when the network connection is made. -
Page 41: System - Scan Menu
System - Scan Menu Click the System tab and then the Scan button. Clicking the Scan Network button will locate the IP Addresses of other RMQ-230-3G monitors on the network. Figure 4–16: Scan Menu System - Option Menu Click the System tab and then the Option button. This menu allows management of all of the RMQ-230-3G monitors you may have in your system.
Need help?
Do you have a question about the RMQ-230-3G-TT and is the answer not in the manual?
Questions and answers