Table of Contents
Advertisement
Parameters
VOLUME
BRIGHTNESS
CONTRAST
INTENSITY
APERTURE
OSD Menus
The OSD Menus allow you to adjust a wide variety of control parameters for the
monitor. Refer to Table 2-5 through Table 2-10 for typical values and domain
ranges. The following is a description of how to use the OSD Menus:
1. Press the Menu button to display the Main Menu.
2. Use the Up and Down buttons to navigate through the submenus.
3. Press the Enter button to enter the parameter selections in the chosen
submenu.
4. Use the Up or Down buttons to cycle through the submenu selections.
5. When the desired option is highlighted, press the Enter button to select it.
6. Use the Up or Down buttons to adjust the parameter value up or down,
make a selection, or turn a function on or off.
7. Press the Enter button to accept your parameter change -or- press the
Menu button to cancel your change.
8. Press the Menu button to back out of any submenu, and finally to remove
the OSD Menus from the screen.
Table 2-4: Quick Menu
Default Value
16
50
50
50
0
Page
14
Domain Range
0 - 31
0 - 100
0 - 100
0 - 100
0 - 63
Advertisement
Table of Contents
