On-Screen Display Features - Wohler panorama RM-3357-HD User Manual

R M - 3 3 5 7 - H D U s e r G u i d e
O n - S c r e e n D i s p l a y F e a t u r e s

On-Screen Display Features

8 2 1 6 8 2 : R M - 3 3 5 7 - H D U se r G u i d e
10
© 2 0 1 0 Wo h l e r Tec h n o l o g i e s , I n c. A l l r i g h t s r e s er ve d .
Table 1–2 RS-485 Pin Out
Pin RS485 In terminal
5 Rx-
6 Tx+
7, 8 NC
• Analog Audio Input: Input terminal for the analog audio signal.
L: left audio channel; R: right audio channel.
• Analog Audio Output: Input terminal for the analog audio signal.
L: left audio channel; R: right audio channel.
• Tally Interface Connector: This DB9 connector controls the tally
lights on the front panel. Refer to
Figure 1–4
• Power Connector: To provide power to the unit, attach the supplied
100 to 240VAC to 12VDC power supply to this connector.
Some of the buttons and OSD Menu control the display of features on
the screen as shown in
Figure 1–4
Rear Panel DB9 Connector Pin Out
Figure 1–5 below.
RS485 Out Terminal
Rx-
Tx+
NC
below for the pin out.