The MON1 HR Series units are high-resolution video monitors capable of monitoring either Standard Definition (SD) or High Definition (HD) SDI video signals using an all digital signal processing (DSP) path. The MON1-T/7W-HR model is mounted in a 3RU half-rack width extended length chassis designed to install into a Tektronix® style rack mount “Tek Tub” chassis.
5.125 x 8.375 x 6.375” (213 x 130 x 161.9mm) Weight: MON1-T/7W-HR: 5.5 lbs (2.5 kg) MON1/7W-HR: 3.7 lbs (1.67 kg) Units are designed to meet, at time of manufacture, all currently applicable product safety and EMC requirements, such as those of CE.
Mounting The MON1-T/7W-HR model mounts into a 3U half-rack size Tektronix® style rack mount “Tek Tub” chassis. The MON1/7W- HR desktop model is fit into a 3U half-rack size desktop chassis with front feet that fold out for tilt up viewing and threaded holes for mounting within recesses such as those of a console or desk.
MON1 HR Series User Manual P/N 821633 Rev-A Section 2: Operation Front Panel Features Please refer to Figure-2a on the facing page to familiarize yourself with the front panel features of the MON1 HR Series unit. The following sections describe these functions and are referenced, by number, to Figure-2a. Power Indication LED This LED glows GREEN to indicate the units Power Connector (Item A) is connected to mains power and an operation voltage is present.