IntesisBox IBOX-ASCII-KNX User Manual page 22

®
IntesisBox ASCII Server - KNX
Useful tips for a more quick and comfortable use and configuration of the signals table:
The columns Spon, EIS, R, W, T, U and Active can be modified selecting one or just more
than one consecutive cells in the same column and using the contextual menu appearing
with mouse right button click over the cells selected.
The columns R, W, T, U and Active can be also modified using mouse-left-button double-
click over the desired cell.
In column Add you can enter the desired value individually per cell or you can auto
enumerate some consecutive cells, for this last follow these steps:
1. Select using the left mouse button (clicking and dragging) the Add field of all the
rows in the list to which you want to automatically assign addresses (must be
consecutive rows).
2. Click right mouse button over the selected fields and select Auto Enumeration option
from the pop-up menu that will appear.
3. Enter the first value to assign.
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU
User's Manual v10 r14 eng
URL http://www.intesisbox.com
Email info@intesisbox.com
tel +34 938047134
22 / 36