Download  Print this page

Drugs, Alcohol Or Medication - Husqvarna SMART 40 Safety And Operating Instructions Manual

Electronic pokers
Hide thumbs


Protective gloves
Proper protective boots
Appropriate work overall or similar clothing (not
loose-fitting) that covers your arms and legs.

Drugs, alcohol or medication

WARNING Drugs, alcohol or medication
Drugs, alcohol or medication may impair your
judgment and powers of concentration. Poor
reactions and incorrect assessments can lead to
severe accidents or death.
Never use the machine when you are tired or
under the influence of drugs, alcohol or
No person who is under the influence of drugs,
alcohol or medication may operate the machine.
WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
device until you are ready to start the machine.
Learn how the machine is switched off in the event
of an emergency.
WARNING Slipping, tripping and falling
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
Always make sure that no hose or other object is
in your way or in any other person's way.
Always make sure you are in a stable position with
your feet as far apart as your shoulders width and
keeping a balanced body weight.
© 2016 Construction Tools PC AB | No. 9800 1207 01d | 2016-06-21
Original instructions
Safety and operating instructions
WARNING Dust and fume hazard
Dusts and/or fumes generated or dispersed when
using the machine may cause serious and permanent
respiratory disease, illness, or other bodily injury (for
example, silicosis or other irreversible lung disease
that can be fatal, cancer, birth defects, and/or skin
Some dusts and fumes created by compaction work
contain substances known to the State of California
and other authorities to cause respiratory disease,
cancer, birth defects, or other reproductive harm.
Some examples of such substances are:
Crystalline silica, cement, and other masonry
Arsenic and chromium from chemically-treated
Lead from lead-based paints.
Dust and fumes in the air can be invisible to the
naked eye, so do not rely on eye sight to determine
if there is dust or fumes are the air.
To reduce the risk of exposure to dust and fumes,
do all of the following:
Perform site-specific risk assessment. The risk
assessment must include dust and fumes created
by the use of the machine and the potential for
disturbing existing dust.
Use proper engineering controls to minimize the
amount of dust and fumes in the air and to
minimize build-up on equipment, surfaces,
clothing, and body parts. Examples of controls
include: exhaust ventilation and dust collection
systems, water sprays, and wet drilling. Control
dusts and fumes at the source where possible.
Make sure that controls are properly installed,
maintained and correctly used.
Wear, maintain and correctly use respiratory
protection as instructed by your employer and as
required by occupational health and safety
regulations. The respiratory protection must be
effective for the type of substance at issue (and if
applicable, approved by relevant governmental
Work in a well ventilated area.
If the machine has an exhaust, direct the exhaust
so as to reduce disturbance of dust in a dust filled
Operate and maintain the machine as
recommended in the operating and safety
Wear washable or disposable protective clothes
at the worksite, and shower and change into clean
clothes before leaving the worksite to reduce
exposure of dust and fumes to yourself, other
persons, cars, homes, and other areas.


Table of Contents

  Also See for Husqvarna SMART 40