Scan For Amax-4800 Series Devices - Advantech AMAX-4800 Series User Manual

3.3.4

Scan for AMAX-4800 Series Devices

Select the I/O - Configuration -> I/O Devices menu item, then right click and select
Scan Devices to initiate a scan for EtherCAT devices. Before scanning the devices,
ensure that TwinCAT is in the Config mode. The current mode of the TwinCAT Sys-
tem Manager is displayed at the lower right corner of the utility. Users can switch
between modes by clicking the
AMAX-4800 User Manual
button and selecting
30
in the toolbar.