Siemens SIMOTICS HV C Operating And Installation Instructions page 34

Preparations for use
4.13 Transport and storage
Preconditions and preparations
● Only store goods in undamaged packaging. Unpack the goods if the packaging is damaged.
● Repair any damage to the packaging before putting the equipment into storage insofar as
General instructions for storage
Wherever possible, store the machine in a storage room. The place of storage must satisfy
the following general conditions:
● Select a sufficiently sized dry and horizontal place of storage that is above flood level and
● Protect the machine from shocks and humidity.
● Position machines, devices and crates on pallets, wooden beams or foundations that
● Ensure that the air circulation under the equipment is not impeded.
Storing outdoors
When storing the machines outside, the storage location must comply with the following
conditions:
● The ground must be sufficiently strong. Prevent the machine from sinking into the ground.
● Covers or tarpaulins used to protect the equipment against the weather must not make
34
Correctly store the goods corresponding to the type.
this is necessary to ensure proper storage conditions.
free of vibration (v ≤ 0.2 mm/s).
eff
– The place of storage must be well ventilated as well as free of dust and frost. Provide
protection against extreme weather conditions. Ensure that the temperature remains
stable in the range from 10 °C to 50 °C – or 50 °F to 120 °F. If there is a risk of
condensation, the room temperature should be approx. 10 K above the outside
temperature. The temperature should not fall below ‑20° C.
– The relative humidity of the air should be less than 60%.
– The floor of the place of storage must be sufficiently strong. The maximum permissible
floor loading or storage compartment loading may not be exceeded.
– The ambient air must not contain any harmful gases.
protect them against rising damp and water.
– Place wooden spacer blocks between the covers and the machine.
– Covers or tarpaulins must not trail on the floor around the machine.
contact with the surfaces of the equipment. Otherwise air circulation under the stored items
will be prevented.
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
Operating Instructions 06/2018