Introduction; About These Instructions - Siemens SIMOTICS HV C Operating And Installation Instructions

Introduction

In the following text, the motor is referred to as "electrical machine" – or abbreviated, just
"machine".
1.1

About these instructions

These instructions describe the machine and explain how to handle it, from initial delivery to
final disposal of the equipment. Keep these instructions for later use.
Read these operating instructions before you handle the machine and follow the instructions
to become familiar with its design and operating principles and thus ensure safe, problem-free
machine operation and long service life.
Please contact the service center (Page 111) if you have any suggestions on how to improve
this document.
Machine-specific data
Technical data for the machine and all of the necessary drawings, documents for verifying the
qualitative implementation of the machine and, where relevant, additional documents on the
components, are provided in the separate Appendixes to the Operating Instructions.
● Technical data and drawings
● Quality documents
● Additional documents
Text format features
The warning notice system is explained on the rear of the inside front. Always follow the safety
instructions and notices in these instructions.
In addition to the safety-related warning notices which you must read, you will find the text in
these instructions is formatted in the following way:
1. Handling instructions are always formatted as a numbered list. Always perform the steps
● Lists are formatted as bulleted lists.
Note
A Note is an important item of information about the product, handling of the product or the
relevant section of the document. Notes provide you with help or further suggestions/ideas.
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
Operating Instructions 06/2018
in the order given.
– Lists on the second level are hyphenated.
1
11