Siemens SIMOTICS HV C Operating And Installation Instructions page 15

Live parts
Electric machines contain live parts.
Fatal or severe injuries and substantial material damage can occur if the covers are removed
or if the machine is not handled, operated, or maintained properly.
● Always observe the "five safety rules" (Page 14) when carrying out any work on the
● Only remove covers in the manner described in the operating instructions.
● Operate the machine properly.
● Regularly and professionally maintain the machine according to the instructions provided
Rotating parts
Electric machines contain dangerous rotating parts.
Fatal or severe injuries and substantial material damage can occur if the covers are removed
or if the machine is not handled, operated, or maintained properly.
● Only remove the covers using the methods described by these operating instructions.
● Operate the machine properly.
● Regularly and correctly maintain the machine.
● Secure free shaft extensions and other rotating part such as couplings and pulley belts
Hot surfaces
Electric machines have hot surfaces. Touching hot surfaces can result in severe burns.
● Allow the machine to cool before starting work on the machine.
● Only remove the covers using the methods described by these operating instructions.
● Operate the machine properly.
Hazardous substances
Chemical substances required for the setup, operation and maintenance of machines can
present a health risk.
● Read the information in these operating instructions and the product information supplied
● Observe the relevant safety regulations and wear the personal protective equipment
SIMOTICS HV C 1NB1402-2AA84-4CA0-Z
Operating Instructions 06/2018
WARNING
machine.
in the "Maintenance" (Page 86) chapter of the operating instructions.
WARNING
so that they cannot be touched.
WARNING
CAUTION
by the manufacturer.
specified.
Safety information
2.4 Safe handling
15