Standard Configuration H04; Features - ABB REX 521 Technical Reference Manual, Standard Configurations

1MRS 751802-MUM
3.3.4.
3.3.4.1.
Protection Relay
Technical Reference Manual, Standard Configurations

Standard configuration H04

Features

• Three-phase non-directional overcurrent protection with three stages
• Three-phase transformer inrush and motor start-up current detector
• Directional earth-fault protection with three stages
• Non-directional earth-fault protection with three stages
• Phase discontinuity protection for three phases
• Three-phase thermal protection for cable
• Supervision function for energizing current input circuit
• Supervision function for energizing voltage input circuit
• Current waveform distortion measurement
• Three-phase power quality monitoring for voltage
• Three-phase current measurement
• Neutral current measurement
• Three phase voltage measurements
• Residual voltage measurement
• System frequency measurement
• Three-phase power and energy measurement
• Calculation of the accumulated electric breaker wear of the circuit breaker (CB)
• Transient disturbance recorder
• Trip-circuit supervision
• Delayed trip output for the circuit-breaker failure protection (CBFP) function
• Automatic reclosing 1...5 shots
• Circuit breaker control with indication
• Lockout function
• Object indication
• Logic control position selector
• User-configurable I/Os
• Interlocking
NOTE! In the disturbance recorder it is possible to record only 16 digital signals.
1. All three stages of the I
I (1/5A) channel.
0
>, I >>, I >>> function block are fixedly configured to the
0 0 0
REX 521
1
41