Installing ACP Lonworks
98
Setting whether to use CH6 function
To connect to the Chiller from the ACP Lonworks, M (Chiller) shall be selected in CH6 USAGE.
D (demand controller) setting is not used.
- When you press the 'SET' button of the ACP Lonworks, menu screen will be displayed.
Use up and down (▲, ▼) buttons to select [Contents], and press "SET" button again.
While [CH6 USAGE] is selected, if you press "SET" button, you can select one from D
(Demand) or M (Modbus).
PLNWKB000
Setting whether to use air conditioner 0.5°C control function
You can control the desired temperature of the air conditioner in the units of 1°C or 0.5°C in the
ACP Lonworks.
It is set to control in the units of 1°C at the product ship-out, and if you want the control in the
units of 0.5°C, change the setting as in the following order.
- Caution: 0.5°C control function usage is limited for some indoor/outdoor units or remote con-
trollers.
PLNWKB000
Click SET
button
Click SET
button
Click SET
button
Click SET
button